PSC Logo
Professional Sound Corporation ® is a Leading Manufacturer and Distributor of Professional Audio Products for the Film and Video Industries.
Home >>> RF Multi Coupler

RF Multi Coupler

Professional Sound Corporation® has designed and built a new radio mic antenna distribution amplifier. The PSC RF Multi Coupler is a portable, wide bandwidth, RF Multi Coupler designed to be used with all wireless receivers. This new distribution amplifier is a single input, four output device covering the frequencies from 50 to 900 Mhz. It is powered from two 9 volt batteries or from an external source of 12 to 24 Vdc. Alkaline batteries provide more than 20 hours of operation. All input and output connectors are chassis mount BNC's. The PSC RF Multi has a low noise figure of 2.8dB and offers a typical isolation factor of 24 to 28 dB between receivers. Together these figures ensure that your wireless will perform to the highest standards.

The PSC RF Multi is built to exacting specifications and contains battery status indication LED's and a three way power switch. The housing is made from aircraft aluminum and black powder coated finished to provide years of field use. The wide bandwidth allows the unit to be used with all wireless receivers. The device adheres to part 15 of the FCC regulations. Licensing is the responsibility of the owner/user. The RF Multi is covered by a one year limited warranty.

PSC # FPSC0006
Size 4.10" x 4.10" x1.3"
(10cm x 10 cm x 3.3cm)
Weight 8.5 oz (250 gm)
Power 2 x 9V Alkaline or external 12 to 24Vdc
Input Impedance 50 Ohms
Output Impedance 50 Ohms
Frequency Range 50 - 900Mhz
Maximum Input Level +13dB
Noise Figure 2.8dB
Output Isolation >24dB
Finish Black Powder Coat
Warranty 1 Year, Limited

Features & Specifications subject to change.