The new Alexis audio mixer from PSC represents a fusion of cutting edge circuit design housed in a rugged, yet sleek user-friendly design. This new mixer offers several features not found on any other mixer. These include quick and easy channel routing assignments via color coded internally lit toggle switches. Every input can be assigned Pre-fader, Off or Post-Fader to any of the output busses as well as to the individual input channel’s dedicated direct output. This signal routing flexibility was pioneered in our flagship Solice mixer. In addition, PSC offers an optional Slot Receiver Six Pack that can be directly interfaced to the Alexis mixer. When this option module is used, a simple front panel toggle switch selects between the normal XLR input connector and the RF receiver input for extreme flexibility in the field. This new Alexis mixer also offers PSC’s exclusive built in NP-1 battery holder and power distribution, a hardwired boom remote control and an over abundance of output connectors…..more than 16 in total. Each input features a super low noise pre-amplifier, active variable high pass filters, PFL (pre fader listen) channel assignment switches, a limiter and a dedicated direct line output. The output section contains precision peak reading multi color LED meters, slate microphone, private line, reference oscillator, output limiters, and a host of usable output connectors all of which are switchable line or microphone level. All of this has been built using the finest parts available including NKK sealed switches, Clarostat Conductive Plastic Pots, Neutrik, Switchcraft, and Hirose connectors to name but a few.
Size | 12.25” wide x 8.00” deep x 3.5” high (rear) 2.35” high (front) 31cm wide x 20cm deep x 9cm high (rear) 6cm high (front) |
---|---|
Weight | 4.4 Lbs (2Kg) |
Inputs | 6 Full Size XLR Female, Line or Microphone level |
Outputs | 4 Full Size 3 Pin XLR Male
4 Mini 3 Pin XLR Male 2 Hirose 10 Pins Female 1 Mini 5 Pin XLR Male 6 Mini 3 Pin XLR Male (Individual Channel Outputs) |
Global Gain | 80dB |
Microphone Power | 48PH per DIN Specs |
Metering | Multi Colored LED, Peak Reading Output Meters, 20 Segments Input Meters, 10 Segments |
Signal to Noise | 130dB EIN |
Distortion | 00.04% THD+Noise Typical |
Limiters | All Inputs and Outputs, Variable Ratio |
Temperature range | -20F to +120F (-7C to +49C) |
Warranty | 1 Year, Limited |
Features & Specifications subject to change.