The Professional Sound Corporation®
Phone Tap has been designed to be used by the radio, television and
film industries as an interface for recording audio from a standard
telephone line. This device can be connected to virtually any standard
telephone line via the supplied cables and adapters. The PSC Phone
Tap, once connected, will emulate a standard telephone. When that
telephone line is called, a red "ring" LED will flash. The operator of
the PSC Phone Tap then flips the switch to "on" and the line will
be seized just as a normal phone would do. The red "ring" LED will stop
flashing and the green "seize" LED will light indicating that the line
has been seized. Audio received over the phone line is then available on
the output XLR for recording purposes.
Two sides of a conversation can also be recorded if a standard telephone
is connected in parallel with the PSC Phone Tap. A dual phone
jack is provided to allow this configuration. The PSC Phone Tap
is supplied with several cables and adapters to allow connection to any
standard telephone line. This device is completely line-powered and the
audio output is transformer-isolated from the phone line. This device
adheres to part 15 of the FCC regulations. Licensing is the
responsibility of the owner/user.
Designed
& Assembled in America