PSC
Miranda Mixer
Production Version
Information Update
Miranda was conceived to be the ultimate mixer for film and television
production. We first showed our prototype Miranda at the
2005 NAB show. The customer feedback was amazing. Customers
from around the world stopped by to see, touch and meet Miranda.
But Miranda was far from finished. She was really just an
engineering prototype, a test of our abilities and an announcement that
we were going to take audio mixing to a whole new level.
During the past 18 months we have
displayed Miranda at several trade shows and also sent her out to
several of our dealers for evaluation and feedback. This allowed
us to collect a huge archive of ideas for improving Miranda from you,
our customers. We thank each and every one of you who took the
time to stop by, call or e-mail us with your suggestions. The
pre-production model you see here is the result of your involvement.
Miranda’s
Display Panel contains two Touch Screen Controlled Displays
and two 16:9 Video Displays
|
Input Side Touch Screen Controller: |
|
Output Side Touch Screen Controller: |
|
Inputs 1 through
10 Meters |
|
Outputs 1 through
10 Meters |
|
Limit Indicators
for Inputs 1 through 10 |
|
Limit Indicators
for outputs 1 through 10 |
|
Reference Tone and
Slate Mic Enables |
|
Reference Tone and
Slate Mic Enables |
|
Video Display
Power Switching |
|
Output Limiters
Enables |
|
Firewire Audio
Output Power Switching |
|
Boom Communication
Touch Pad |
|
AES Digital Audio
Bit Rate Selection |
|
Slate Mic Touch
Pad |
|
AES Digital Audio
Sampling Rate Select |
|
Reference Tone
Oscillator Touch Pad |
|
|
|
Recorder Remote
Stop/Roll Touch Pad |
|
Input Channel
Controls: |
|
Output Channel
Controls: |
|
12T or 48PH
Microphone Power |
|
External Slate
Microphone Jack |
|
Line or Microphone
Level Input |
|
Main Power Switch |
|
Limiter On/Off
|
|
Headphone
Selection Switches |
|
Phase Reversal |
|
Headphone Volume
Controls |
|
High Pass Filters |
|
Video Display
Camera Selection |
|
Equalization |
|
|
|
Audio Routing (Pre
or Post Fader) |
|
|
|
Assignable Pan Pot |
|
|
|
Pre-Fader Listen |
|
|
|
External Power
Connector |
|
Boom Communication
Inputs |
|
Ipod Input |
|
Headphone Outputs |
|
Main Balanced XLR
Outputs |
|
Main Balanced XLR
Inputs |
|
Dedicated Line
Outputs |
|
Balanced Outputs
DB-26 |
|
Tape Returns DB-26 |
|
Mackie Firewire
Card |
|
PSC AES Digital
Output Option |
|
Recorder Remote
Rolls |
|
Camera Support 10
pins (x4) |
|
Video Input BNC’s
(x4) |
Fader Panel Close Up Billet Side Panel w/ Laser Cut
“Miranda”
Miranda Rear
View, Top Open Miranda Closed for Storage or
Shipping
Note: Miranda will fit a Pelican 1600 Case
Feature Set:
 |
Side panels, fader
drawer and flip-up display panel are all milled from billet aluminum
blocks
|
|
|
Ergonomic “rubber”
coated knobs on most controls for smooth, easy adjustment
|
|
|
Pelican case
ready! Fits easily within a Pelican 1600 case
|
|
|
10 Input Channels
|
|
|
Retractable, slide
out fader drawer. Yes those are P&G faders!
|
|
|
10 Outputs (8
labeled as Main, 2 labeled as Auxiliary)
|
|
|
Four stereo
headphone feeds
|
|
|
Full duplex
communication with two boom operators
|
|
|
Custom made LCD
displays with integral touch screen functions
|
|
|
Reference
oscillator and slate microphone are assign-able to all outputs
including
individual line outputs
|
|
|
Lighted toggle
switches for night use…..they are very cool looking too! |
Designed
& Assembled in America
