DV PROMIX 1
Audio Production Tool
The new PSC DV ProMix 1 combines
several features into one flexible audio tool for field production.
The DV ProMix 1 contains a balanced XLR input with switchable
12T or 48PH microphone powering, followed by a very low noise
microphone pre-amp with continuously variable gain and switchable low
cut filter.
The DV ProMix 1 also incorporates a bright sunlight readable
LED peak meter, a transformer balanced line driver and switchable
limiters on both the pre-amp and the line driver amplifiers. In
addition, the DV ProMix 1 features a monitor return amplifier
with a balanced XLR input and continuously variable gain for
flexibility. Headphone monitoring can be selected from Direct to both
ears, Monitor to both ears, or a combination of the two.
The DV ProMix 1 will also except an optional Boom Pole Remote
slide fader like our AlphaMix for easy operation while booming. Power
is provided by two, 9 volt batteries or external 7-16Vdc. A belt clip
is provided.
The PSC DV ProMix 1 can be used for Boom
operators feeding DV cams or other types of recorders, or for use as
microphone to line amp or as a standalone limiter, or for radio
remotes or as a mic power supply and pre-amp or in a host of other
ways.
 Designed
& Assembled in America
|
FRONT PANEL |
REAR PANEL |
Monitor Return Gain
(continuously variable, push pot) |
Headphone Jack, 1/4" stereo
|
Pre-amp Gain
(continuously variable, push pot) |
Boom Remote Connector, TA5M, for use
with option boom remote slide fade |
Headphone Volume
(continuously variable, push pot) |
Balanced Monitor Input, XLR-3
Female, excepts signals from -50dBv to +10dBv |
|
Power Switch, internal, off,
external, two color LED indicates low battery |
Balance Microphone Input,
excepts signals from -65dBv to -5dBv |
|
Low Cut Filters, 80Hz, 20Hz (flat),
150Hz |
12T/48PH Switch, selects
12T, DYN or 48PH microphone power |
|
Limiters, Pre-amp and Line Driver
Amp, on, off, 2 LED's indicate limit action |
Mic/Line Switch, Selects output
level,
0dBv, -10dBv, -40dBv |
Headphone Selection,
D (direct), M (monitor return), D/M split ears |
Output Connector,
transformer balanced, XLR-3-Male |
|
RC (remote control) LED indicates
when Boom remote is being used |
Ext Power, 2.5mm Jack,
excepts 7 to 16Vdc |
|
Fader, smooth ergonomic fader knob |
|
Output Meter, super bright
multi color LED's, Peak reading |
|
Size
|
4.6" x 1.9" x
5.6" (11.6cm x4.8cm x 14.2cm) |
|
Weight
|
1 Lb, (0.45Kg) |
|
Product Number:
|
FPSCDVMIX1 |
Power: |
2x 9 Volt Batteries or external 7-16Vdc
|
|
Mic Power
|
12T and 48PH
to DIN Specs |
Limiters: |
1ms attack,
100mS release |
|
Chassis:
|
Aircraft
Aluminum |
Finish: |
Powder Coat,
Black |
|
Low Cut Filters:
|
6dB/octave,
-3dB at 80Hz, 150Hz |
Signal to
Noise: |
Mic pre-amp,
128dB EIN A weighted |
|
Warranty
|
One year
limited |
Features
& Specifications subject to change.
|
